Keo Loxeal

ID Sản phẩm: 1

Model: Keo Loxeal

Tình trạng: Còn hàng

Giá: Liên hệ

keo dán công nghiệp Loxeal:

Keo dán chống tháo bulong, chống xì ga, chống lỏng lưng bạc đạn, keo dán thay gioăng...

Keo làm kín ren Loxeal
keo dán ống Loxeal

Keo khóa ren Bulong Loxeal
Keo chống tháo bulong Loxeal

Keo thay thế gioăng Loxeal

Keo dán mặt bích Loxeal

Keo dán ống Loxeal

Keo dán chống tháo bulong Loxeal

Hóa chất bảo trì khuôn Loxeal

Keo dán mặt bít Loxeal

Keo Loxeal 54-03:

Physical properties
Composition: anaerobic methacrylate
Colour:: blue
Fluorescence : under blue light
Viscosity resin (25°C - mPa.s): 1000
Specific weight (25°C - g/ml): 1,05
Max diamter of thread/gap filling: M24 - 0,20 mm
Flash point: > 100°C
Shelf life 25°C: 1 year
Curing properties

Bolt M 10 x 20 - quality 8.8 - Nut h = 0,8.d at 25°C
Handling cure time: 10 - 20 minutes
Functional cure time: 1 - 3 hours
Full cure time: 5 -10 hours
Shear strength (ISO 10123): 8,0 – 12,0 N/mm²
Locking torque (ISO 10964)
breakaway: 14 - 20 N.m
prevailing: 4 - 9 N.m
Temperature range: -55 +150°C

Keo Loxeal 89-51, 75ml

Physical properties
Composition: anaerobic methacrylate
Colour: silver
Viscosity (25°C - mPa.s): 60.000 – 720.000 HT
Specific weight (25°C - g/ml): 1,1
max diameter of thread/ gap filling: 2” - 0,30 mm
Flash point: > 100°C
Shelf life 25°C: 1 year
Curing properties
Bolt M 10 x 20 - quality 8.8 - Nut h = 0,8.d at 25°C:
Handling cure time: 15 - 30 minutes
Functional cure time: 3 - 6 hours
Full cure time: 12 hours
Shear strength(ISO 10123): 25 - 30 N/mm²
Locking torque (ISO 10964):
breakaway: 40 - 45 N.m
prevailing: 15 - 20 N.m
Temperature range: -55 +150°C

Keo Loxeal 59-30, 310ml

Physical properties
Composition : silicon acetic curing
Colour : red
Physical appearance: paste
Specific weight (g/ml): 1,0 – 1,1
Shelf life : 1 year a 25 °C
Depth of cure
The graph below shows the depth of cure of the product (mm)
vs. time (h)
Test done at 23°C – H.R. 50%
Curing properties
Track free time: 12 – 30 min
Handling time: 1 - 2 hours
Functional cure time: 2 - 4 hours
Full cure time: 12 - 24 hours
Typical properties after 7 days/ 23°C/ UR 50%
Hardness - Shore A (ASTM 2240): 32 ± 5 Shore A
Tensile strength (ASTM D-412): 2,5 MPa
Elongation at break (ASTM D-412): 300% -500%
Modulus - Young: 0,4 MPa
Compression modulus (ASTM D-575): 2,2 Mpa
Coefficient of thermal expansion (%/°C): 0,05
Temperature range: -60°C + 300°C

Keo Loxeal 82-33, 50ml

Keo Loxeal 83-21, 250ml

Để biết thêm thông tin sản phẩm và giá, vui lòng gọi: 0908505676